Customised insoles

You are here:

Home
Anwendungsbeispiele
Customised insoles

Einlagen aus nora Materialien mit Deckschicht Lunasoft SL in camouflage

Application example

Customised insoles

Application area: Customised insoles

Used materials: Lunasoft SL trendline (2-3 mm) as top layer in colour camouflage and Lunatec SE or Lunasoft AL (8-10 mm) as the base.

Lunasoft SL are very lightweight, smooth EVA sheets, that are used as lift sheets or top layers.

Lunatec SE (approx. 45 Shore A) and Lunasoft AL (approx. 52 Shore A) are stable and resilient EVA expanded rubber sheets, which is above all particularly well-suited as lifting material for sports and street shoes as well as orthopaedic treatment. This high-quality material is characterised by an excellent restoration capability, resilience, high dimensional stability and, simultaneously, light weight.

Additional material benefits

high-grade nora® quality, made in Germany
hygienic, closed cell EVA material
SG pollutant tested
dermatologically tested skin compatibility

open catalog

Manufacture

The manufacturing of customised insoles can be executed in only a few steps:

Cut out both materials.
Warm up the base material Lunatec SE or Lunasoft AL for approx. 4-5 minutes in the oven.
Setting of the oven: 130° | 260°F
For heat moulding put the material over the last in a vacuum press and let it cool for 8-10 minutes.
Grind base of the insole.
Coat the Lunasoft SL top layer as well as the top of the base material with glue and allow to dry.
Glue in the top layer of Lunasoft SL. For better fitting use a hot air gun to activate the material briefly.
Subsequently grind insoles to final shape.

Valuable tips

Rule of Thumb: Heating time x factor 2 = optimal cooling time
The indicated times are tested guidelines in order to achieve uniform warming of approx. 130°C | 260°F. Consequently, depending on your oven, temperature accuracy, frequency of opening the oven door and your own experience, times can vary.